Email：star15@alloyssi.com
product
It is mainly used in the manufacture of steel and cast iron and produce fine quality steel. Ferro Silicon is used to remove oxygen from steel for better quality and durability. Our clients also use Ferro Silicon to manufacture pre-alloys like Magnesium Fe
We're here to help: Easy ways to get the answers you need.
We are industry’s leading manufacture and producer of Ferro Silicon. It is seen that stainless sector is one of the fastest growing categories in the steel industry and thus Ferro Silicon comes into the picture. Stainless steel requires Ferro Silico compared to regular carbon steel.
It is mainly used in the manufacture of steel and cast iron and produce fine quality steel. Ferro Silicon is used to remove oxygen from steel for better quality and durability. Our clients also use Ferro Silicon to manufacture pre-alloys like Magnesium Ferro Silicon (FeSiMg). It is used to modify melted malleable iron.
Ferro Silicon is made available in different composition as per the requirements of the clients. It may be low Al, High Purity or low C Ferro Silicon.
It is used in the production of special steel qualities and better durability.
Our special grades of Ferro Silicon help to keep both the content of inclusions and the carbon content in the final steel at low levels.
Ferro Silicon is used as raw material high-purity quartz, charcoal and iron ore in the production of arc furnaces.
| Composition | Si | C (Max) | S (Max) | P (Max ) | AI (Max*) | Ca (Max*) |
| FeSi93 | 90-95 | 0.15 | 0.050 | 0.050 | 2.5 | - |
| FeSi88 | 85-90 | 0.15 | 0.050 | 0.050 | 2.0 | - |
| FeSi83 | 80-85 | 0.15 | 0.050 | 0.050 | 1.75 | - |
| FeSi78 | 75-80 | 0.15 | 0.050 | 0.050 | 1.50 | - |
| FeSi76A01 | 74-78 | 0.03 | 0.020 | 0.020 | 0.10 | - |
| Composition | Si | C (Max) | S (Max) | P (Max ) | AI (Max*) | Ca (Max*) |
| FeSi73Al05 | 70-75 | 0.15 | 0.050 | 0.050 | 0.50 | - |
| FeSi73Al15 | 70-75 | 0.15 | 0.050 | 0.050 | 1.50 | - |
| FeSi73A125 | 70-75 | 0.15 | 0.050 | 0.050 | 2.50 | - |
| FeSi65 | 60-70 | 0.15 | 0.050 | 0.050 | 1.00 | - |
| FeSi48 | 45-50 | 0.15 | 0.050 | 0.050 | 1.00 | - |
| FeSi20P15 | 15-25 | 1.50 | 0.050 | 0.15 | 1.00 | - |
| Fesi73Al2Ca20 | 70-75 | 0.15 | 0.050 | 0.050 | 1.0-2.0 | 1.0-2.0 |
Pre-shipment Inspection Service is the 3rd Party Inspection available with us. SGS or equivalent at seller cost at port of loading.
We can make as your requirement .
Attention :
Our new technoledge ,new Product !!! This kind of Product can replce Ferro Silicon for Steelmaking .
►►►►►
Silicon Brquette ( save cost
PLEASE FILL YOUR CONTACT INFORMATION
send on email.all fields width on * are required.
Please enter your question and contact information.we will get back to you as soon as possible!
Copyright Notice © Anyang Jinsheng Metallurgical Materials Co., Ltd. All rights reserved. Site Index Product Index
